Specifications

ASSEMBLY INSTRUCTIONS

A. Turn the Spring Knob (23) in a counterclockwise direction and then pull it to set down the Main Frame (1)

on the floor. Turn the Spring Knob (23) clockwise to secure the treadmill in the folding down position.

First remove four Stabilizer Knobs (32) and Ø21xØ8.5x1.8t Washers (74) from the right and left sides of

Stabilizer (57). Then insert both Stabilizer Tubes (30) into the tubes of Stabilizer (57) and secure them with

four Stabilizer Knobs (32) and Ø21xØ8.5x1.8t

Washers (74) that were removed.

B. Pull the Short Knob (63), and then lift the Handlebar (68) all the way up. Tighten the Handlebar (68) to the

Stabilizer (57) with two Handlebar Knobs (67) and M10 Washers (73).

C. Attach the Computer (70) onto the Handlebar (68) with two Computer Knobs (69). Install the Safety Tether

Key (65) onto the Computer (70).