Owner`s manual

FOLDING UP THE TREADMILL
Firmly grasp the back end of the treadmill. Carefully lift the end of the treadmill
up into the upright position until the Spring Knob "pops" down into the locked
position. Remove the Knob from the Table Angle Adjustment Tube. Hold
the Table Angle Adjustment Tube with one hand and the other hand to lift the
Table up until the Table Angle Adjustment Tube can be lowered down.
Then lower both Table and Table Angle Adjustment Tube down. Screw the
removed Knob into the knob hole on the back of the Table.
Make sure the deck is securely locked before moving the treadmill. (See
diagrams A, B, and C.) The unit can be carefully tilted onto its transport
wheels for easy moving and storage. Ensure the master power switch is off
and is in the off position and the power plug is un-plugged from the electrical
wall outlet. Store the treadmill in a clean and dry environment away from
children.
CABLE STORAGE:
You may use the Cord Anchor to store the
power cord when it is not in use. Do not lay it on
the ground to avoid cord damage.
STORAGE
23
A
B
Spring Knob
C
Transport Wheel