Owner`s manual

Right Table Hinge
Left Table Hinge
64
86
86
79L
79R
75
74
72
71
Step 4
Install both Right/Left Table Hinges (79R/79L) to the right and left sides of the
Handlebar Support Tube Frame (75) by sliding both Right/Left Table Hinges
(79R/79L) onto the right and left tubes on the sides of the Handlebar Support
Tube Frame (75). Then attach the Table (64) onto both Right/Left Table Hinges
(79R/79L) with four M6x16mm Hexagon Socket Head Cap Bolts (86). Tighten
bolts with the 5M Allen Wrench with Phillips Screwdriver provided.
Lift the Table Angle Adjustment Tube (68) up onto the Table Angle Adjuster
(70) which is under the Table (64). The angle of the Table (64) can be
adjusted. There are 4 levels of incline for the Table (64). Secure the Table
(64) in place by tightening the M6x34 Knob (74).Place the Safety Tether Key
(71) onto the Computer (72).
Tool: Hardware:
ASSEMBLY
15
Allen Wrench with
Phillips Screwdriver 5M
(86) Hexagon Socket Head
Cap Bolt (M6x16mm)
4 PCS