Specifications

XP250 INSTALLATION AND OPERATION MANUAL
Page 10
TURN ON INVERTER:
XP-250:
Note:
TURN ON APPLIANCE/LOAD:
1.
2.
3.
Note:
Turn inverter on using toggle switch on front panel, or the
"REMOTE" switch if installed. LED next to the switch will illuminate,
indicating the inverter is operational.
If using "REMOTE" switch, the front panel switch must be
off. (If either switch is "on", the inverter will turn on. Both switches
must be off for the inverter to turn off.)
Check Input Power Requirements of the appliance. Make sure
that it is less than Rated Output Power of the inverter. If more than
one appliance will be run simultaneously, the sum of their Input
Power Requirements must be less than Rated Output Power of the
inverter.
If appliance/load has been hard-wired to the barrier terminal strip
as illustrated in Appendix "B", then turn appliance on. Otherwise;
Plug the appliance into the receptacle provided on front panel,
then turn appliance on.
It is recommend that the inverter be turned ON before the
appliance/load.
.
.
.
.
.
.
.
Operation
4.0