User's Manual

www.excelsecu.com
4. Then you can test the fingerprint, remove the enrolled fingerprints, change the enrolled
fingerprint name and set PIN via Excelsecu FidoFpTools to enjoy secure authentication
experience.
4.2. Test Fingerprint
1. Click Test Fingerprint, and follow the instructions. The key flashes green light. You are
required to verify the fingerprint.
Warning:
For security concern, the key will be blocked if user fails to verify fingerprint 15 times (3 times
per retry × 5 retry counts) in a row. User can only unlock via reset device (All stored data will
be lost).
4.3. Remove Fingerprint
Make sure to choose the right fingerprint to delete. (Take f2 as an example). Before deleting
the fingerprint, you need to verify the fingerprint first. (At this time, the green light of the key
flashes). After verification, the fingerprint will be removed.