User's Manual

www.excelsecu.com
➢ [GetHardwareInfo] to get the information of Bluetooth MAC address and hardware
ID.
➢ [GetBatteryState] to get the battery level of the eSecuCard-S.
➢ [GetRTC] to get the real time.
➢ [UpdateRTC] to update the real time.
➢ [InquireKey] to get the button value.
(Note: After pressing “InquireKey”, mobile app will be waiting for the button value,
and button pressing on the eSecuCard-S is required, or it will return Timeout error.)
➢ [changepin] to change the pin.
➢ [verifypin] to verify the pin.
4. Screen Test
➢ [DisplayPic1] [DisplayPic2] [DisplayPic3] to display the existing pictures in the card.
➢ [WriteText] to write text from mobile app to card and display the text.
➢ [Write Pic] to write picture from mobile app to card and display the picture.
(Note: 1. This function will overwrite the existing pictures. 2.The time to writePic will
be around 30s.)
➢ [Clearscreen] to clear the EPD screen display.
➢ [RunDemo] to run and display all the text and all the pictures in the card.
5. Results
➢ To display all the results of the command.
➢ [CleanResult] to clean the command result displayed on mobile app.
4.3. PC Application
(Note: eSecuCard-S needs to be turned OFF!)
Contact and contactless reader are supported by eSecuCard-S.
4.3.1. Contact Mode
1. Prepare contact card reader and insert eSecuCard-S into the reader. The card will be in
charging in this mode.
2. In folder “Displaying test”, select any one script to test eSecuCard-S.