User's Manual

www.excelsecu.com
3. Product Picture
① EPD screen, 256*256 pixel.
② EMV chip, also battery recharging terminal.
③ Touch keypad: 0~9, a~z, OK and Cancel.
④ Power mechanical button.
4. How to Use eSecuCard-S
4.1. Turn ON/OFF eSecuCard-S
1. Long press the mechanical Power Button to power on/off. You need to set the PIN
first after power on. It supports 6 to 16 digits. After set successfully, it shows the boot up
logo and enters the BLE mode. If you have set the PIN before, you need to verify the PIN
first after power on. After verify successfully, it shows the boot up logo and enters the BLE
mode.
(Note: Boot up logo can be changed by extended API, please refer to Java Card Extended
APIs)
2. Standby time: 2 minutes.
4.1.1. eSecuCard-S Function Menu
Touch the OK button to enter the function menu. Touch the Cancel button to quit the function
menu.
⚫ Address