User's Manual

Quick Guide
 Plug the USB receiver into the host device or connect the scanner with your device via
USB cable, press the button on scanner, when the beeper prompts, the scanner enters
scanning mode.
 When the blue LED light on the sanner blinks, the sanner is in Bluetooth stanby mode,
you can search for the scanner named BARCODE SCANNER on your mobile phone or
PC and connect to it via Bluetooth. When the blue LED is steady on, the scanner
connects successfully and enters scanning mode.
 When bluetooth and 2.4G are connected at the same time, bluetooth transmission is
preferred
 User can scan the QR code below to change the setting of the scanner.
LED tips
LED status
Description
Steady red light
Battery charging mode
Green light flashes one time
Scanning successfully
Blue light flashes every second
Waiting for Bluetooth connection
Steady blue light
Bluetooth connected successfully
Buzzer tips
Buzzer status
Description
Continuous short beep
2.4G receiver pairing mode
One short beep
Bluetooth connected successfully
One long beep
Enter power-saving sleep mode
Five beeps
Low power
One beep
Reading successfully
Three beeps
Fail to upload data