ESCS-W20 Wireless Code Scanner User Manual V1.
Statement The Company does not assume any responsibility for damage caused by use in unstated conditions in this manual. The Company does not assume any responsibility for damage or problem caused by the use of accessories not approved or provided by our company. The Company has the right to upgrade and improve the product without prior notice and the right to modify this document. Product Features Ergonomic design, easy to use. Supported both USB wired connection and Bluetooth/2.
Quick Guide Plug the USB receiver into the host device or connect the scanner with your device via USB cable, press the button on scanner, when the beeper prompts, the scanner enters scanning mode. When the blue LED light on the sanner blinks, the sanner is in Bluetooth stanby mode, you can search for the scanner named BARCODE SCANNER on your mobile phone or PC and connect to it via Bluetooth. When the blue LED is steady on, the scanner connects successfully and enters scanning mode.
Receiver pairing Pair scanner to 2.4G receiver, scan the QR code below, the scanner enters pairing mode, then plug the USB receiver into you PC, the pairing will complete automatically.
Sleep time setting Scan the sleep time setting QR code to enable time setting, and then scan the time QR code you want to set.
Scanning mode Real-time transmission mode(default) **Storage mode **Storage mode: scan and store barcode inside the scanner, and upload the data to your device when you need it by scanning the “Upload data” code.
Terminators Use(0x0D) as Terminator(default) Use(0x09) as Terminator Use(0x0D,0x0A) as Terminator NONE Terminator Barcode Type Enable all barcode type Enable default barcode type(default)
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
