Instruction manual

2
CONTENTS TABLE
Description Page No.
Contents 2
Safety Precautions 3
Key Functions 4
Special Dome Features – 4 channel alarm input activation & channel alarm output 5
Getting the dome up & running 6
Overview – introduction to fitting PTZ equipment 6
RS485 Wiring methods & Tips 8
Overcoming RS485 data loss using an RS485 distributor 11
Setting up the Dome Camera 13
RS485 connection – Connecting the Keypad or DVR to the Dome 14
Connecting the video out of the dome 16
If you are using more than one dome on a site 18
Setting up a unique address in a dome 18
Setup of the Protocol and the Default Baud Rate 19
Using the PTZ730 keypad with the excelPTZ series 21
Presets and other functions 22
Patrols (Tours) – How to set them up and use them 23
Auto Scan – How to set it up – Calling the Auto Scan 26
Record Pattern – What is a record pattern? 27
What is the difference between a pattern & a patrol (tour)? 27
How to set it up – Running the Record Pattern 27
Using the Dome’s Advanced Functions 29
Using the Menu System 30
System Setup 31
Display Setup 32
Camera Setup 33
Motion Setup 35
Presets 35
Auto Scan 35
Patrols (Tours) 36
Patterns 37
Clear 37
Privacy Mask 38
Advance Setup 39
System Reset 43
Exit 43
Controlling one camera then another 44
System Installation 45
Alarm Input cable connections 52
4 Channel alarm input activation & single channel alarm output 53
Connecting the Input Alarm devices 54
Connecting the Output Alarm 55
Technical Specification 55
Appendix A: Lightning Proof and Surge Signal Proof 56
Appendix B: General Information – The Cleaning of Dome Cover/Troubleshooting
57