Installation Guide

9
12. Slide the metal pole support tube through the hole until it nests into the circular groove on the
bottom. Then screw the flange to the support board:
13. Slide your light pole, umbrella, or other pole into the metal tube and secure by tightening the 3
screws evenly so the pole is centered. To stabilize the planter, we recommend adding gravel until
it reaches the top of the support beam and then add potting soil above. This will allow for the best
drainage while still giving you the ability to grow beautiful plants.
Note: The wood is finished with a food-safe, oil-based, waterproof sealer. This will help protect the
wood for outdoor use.