0 ft Bistro Light Poles EGP-HD-0429 (1 Pack) EGP-HD-0359 (2 Pack) EGP-HD-0361 (4 Pack) EGP-HD-0360 (2 Pack + 50 ft G40 Lights) EGP-HD-0362 (4 Pack + 100 ft G40 Lights) Questions? Call 1-877-969-2710 or email orders@excelloglobal.
INCLUDED PARTS EGP-HD-0429 1 10FT Poles (Lights Not Included) Light Poles (3 Pieces Each) Wood/Concrete Base Yard Stake Base Self-Tapping Hex Head Screws x1 x1 x1 x3 EGP-HD-0359 2 10FT Poles (Lights Not Included) Light Poles (3 Pieces Each) Wood/Concrete Base Yard Stake Base Self-Tapping Hex Head Screws x2 x2 x2 x6 EGP-HD-0361 4 10FT Poles (Lights Not Included) Light Poles (3 Pieces Each) Wood/Concrete Base Yard Stake Base Self-Tapping Hex Head Screws x4 x4 x4 x 12 2
THANK YOU FOR PURCHASING FROM EXCELLO GLOBAL PRODUCTS! Missing Parts? Please Call 1-877-969-2710 Before you throw away the box, please check that you have all the parts listed below. If any are missing, please contact our customer service at the number above and we will gladly ship your replacement parts free of charge.
INSTALLATION INSTRUCTIONS Option 1 – Installation onto Wooden Decks Using Included Lag Screws If your deck1is not solid wood, please contact the decking manufacturer before installing to ensure Installation proper installation.
Option 2 – Installation onto Concrete or Pavement If installing onto pavement, note that hot weather may soften the asphalt causing the base to loosen or fall. Double check all fasteners regularly to ensure proper tightness.
Option 3 – Installation into Ground – Reinforced with Rebar NOTE: The suggested maximum span of lights for this installation method is 20 feet, subject to your soil conditions. Tools Needed: • Sacrificial piece of wood larger than the diameter of the yard stake • Hammer (the heavier the better) Installation 4 • Rebar (1/2" to 1" in diameter and at least 18" in length – the longer the better) ***Rebar not included.
Option 4 – Installation into Ground – Reinforced with Sika® Postfix® NOTE: Either rebar (see option 3) or Post Foam Mix is the recommended installation method for long term use in soil. Tools Needed • Shovel or Post Hole Digger • Level (optional) Check for any underground pipes or wire before digging holes. Instructions 1. Sika® PostFix® can be found at your local hardware store and is a great option for securely and semi-permanently fixing your poles into soil. 2. Dig a hole 18” deep and at least 8” wide.
Option 5 – Installation into Ground NOTE: This option is recommended for short term applications only. For longer term solutions, it is strongly recommended to install with support rebar (Option 3) or use Sika® PostFix® Fence Post Mix (Option 4). Tools Needed: • Sacrificial piece of wood larger than the diameter of the yard stake • Hammer (the heavier the better) Check for any underground pipes or wire before driving the metal stake or rebar into the ground. 1.
How do I secure the lights to the carabiner clips? The two best ways to secure your lights are with zip ties or reusable rubber twist ties (you can find on Amazon, Home Depot or Lowe’s). Excello Global Products finds the black zip ties to be the easier of the two methods, but would require cutting the tie if you ever want to relocate them. How do I determine my string light pattern? The ideal design will start with asking yourself 3 questions: 1. What area do I want to illuminate? 2.
ft Bistro Light Poles EGP-HD-0429 (1 Pack) EGP-HD-0359 (2 Pack) EGP-HD-0361 (4 Pack) EGP-HD-0360 (2 Pack + 50 ft G40 Lights) EGP-HD-0362 (4 Pack + 100 ft G40 Lights) Questions? Call 1-877-969-2710 or email orders@excelloglobal.
