Use and Care Manual

Copyright © 2017 MAT Industries, LLC
8 - ENG
ASSEMBLY INSTRUCTIONS (CONT.)
• SAVE ALL INSTRUCTIONS
5. Assemble the lower gun hook using
(1) M6 x 45mm long socket head cap screw,
(1) M6 nut, and the supplied hex wrench and
open-end wrench (FIG 9). Tighten securely
(FIG 10).
6. Assemble the upper gun hook using
(1) M6 x 45mm long socket head cap screw,
(1) M6 nut, and the supplied hex wrench and
open-end wrench (FIG 11). Tighten securely.
Assemble the wand by screwing together
the threaded connections of the two wand
halves. Hang the wand on the upper gun
hook, as shown in FIG 12.
7. Assemble the upper hose hanger using (2)
M6 x 45mm long socket head cap screws,
(2) M6 nuts, and the supplied hex wrench
and open-end wrench (FIG 13-16).
Tighten securely.
8. Final unit assembly (FIG 17).
9. A spark plug removal tool is included for
future maintenance (FIG 18). See provided
engine manual for spark plug maintenance
procedures.
FIG 10
FIG 12
FIG 9
FIG 11
upper gun hook
FIG 13
FIG 15 FIG 16
FIG 18
FIG 14
M6 X 45mm
head cap screw
M6 X 45mm
head cap screw
M6 nut
M6 nut
FIG 17