Specifications

EXCELL PRECISION CO., LTD.
SK-VET V1.0 SME300000067
20
Use the ON/ZERO key to
enter a parameter
Back to
the
weighing
mode
Press the TARE key
Press the TARE key
Cont.
Hold function setting
Use the ON/ZERO key to key in a parameter
Default setting = 0
0 ⇒ Hold function disabled
1 ⇒ “Peak hold” mode
2 ⇒ “Stable hold 1” mode
3 ⇒ “Stable hold 2” mode
4 ⇒ “Animal weighing” mode
Hold function setting
LCD displays the last current setting
parameter setting
If is selected, refer to
NOTE 4 to key in parameters
Refer to NOTE 4 to key in
parameters and then press
the TARE key
= Hold function disabled.
= “Peak hold” mode (active when the weight on platter is over 10d）
The scale shows the maximum weight value detected from the continuously changing
weight values. Press any key to exit the hold function.
= “Stable hold” mode 1 (active when the weight on platter is over 10d）
When the scale becomes stable, the display shows the current weight value. Press any key
to exit the hold function.
= “Stable hold” mode 2 active when the weight on platter is over 10d）
When the scale becomes stable, the display shows the current weight value. Re-zero the
scale (weight below 10d) to exit the hold function.
= “Animal Weighing ” mode（active when the weight on platter is over 10d）
Refer to NOTE4 to key in the stabilization range and timer parameters. When the scale
becomes stable, the display shows the current weight value. Re-zero the scale (weight
below 10d) to exit the hold function.