- EXCELL PRECISION Weighing Scale User Manual

EXCELL PRECISION CO., LTD.
Dolphin 9903 V 1.1 SME300000041
16
Use the ON/ZERO or UNITS
key to input a parameter
Use the ON/ZERO or UNITS
key to input a parameter
Use the ON/ZERO or UNITS
key to input a parameter
1-5 Environment Parameter Setting
4 The parameters in remain the same after the ones has been modified
in
4 is not accessible for approval models.
ON/ZERO ⇒ Upward digit selecting (0-9)
UNITS ⇒ Downward digit selecting (9-0)
TARE ⇒ Move the cursor rightward
NET/GROSS ⇒ Move the cursor leftward
Press the TARE key
Return
-
to
-
zero
-
point setting
Default setting = 0
0 ⇒ No skip 5 ⇒ skip 5d
1 ⇒ skip 1d 6 ⇒ skip 6d
2 ⇒ skip 2d 7 ⇒ skip 7d
3 ⇒ skip 3d 8 ⇒ skip 8d
4 ⇒ skip 4d 9 ⇒ skip 9d
4 The function is active when the
weight is over 1/3 of full scale
Digital switch & stabilization range setting
The display shows the current setting
Noise filter parameter setting
The display shows the current setting
Return-to-zero-point setting
The display shows the current setting
Noise filter parameter setting
Parameters 0 ~ 9 selectable;
Default setting = 5
The larger the number, the speeder the
filter reacts
. Therefore, larger parameter is
suitable for unstable environment.
Digital switch & stabilization range setting
Parameters 0 ~ 9 selectable;
Default setting = 0
The larger the number, the easier for the
scale to get stable.
Press the TARE key
Press the TARE key
Press the TARE key