High Precesion Counting Scale User Manual

EXCELL PRECISION CO., LTD.
21
2-12 AUTO CALIBRATION
(1) When the displays are zero, press . key then lb/kg key at the same time. Don‘t release your
fingers from the keys until the weight display is appeared “ - - - - - ”.
®0¬
3
.
.
Stable
3
the value of full capacity of the scale
(2) Put the mass (full capacity) on the platter. The scale will be calibrated automatically when it is
stable. While the scale is reverting to zero, please take the mass away from the platter.
¨ Press CE can escape from the calibration mode.
F When the display appears the value of full capacity, you can directly input the value of the
weight which you want to calibrate. Then, place the mass (calibrated weight) on the platter.
The scale will be calibrated automatically when it is stable.
RECALL THE ORGINAL VALUES OF CALIBRATION
If there is something wrong with the auto calibration, press CE then lb/kg at the same time.
Release your finger from the lb/kg then CE key while the scale is counting down. The scale will
return to the original values of which had been calibrated in factory.
¨ If scale with one weighing unit, please use key to instead of lb/kg key.
U.W.
PST