User's Guide

User Guide
- 37 –
Example:
If “20XX\r” is responded, the unit was calibrated when
the lamp hours was 20.
Note: Need CAL – the S2000 PRO/ELITE need to be calibrated
before the calibrated lamp hours can be obtained.
14. Get iris Level
Command to S2000 PRO/ELITE; GIL
Response from S2000 PRO/ELITE; n (n represents a integer
number 1-100)
Example:
If “20XX\r” is responded, the iris Level will be 20%.
15. Clear unit calibration
Command to S2000 PRO/ELITE; CLC
Response from S2000 PRO/ELITE; “Done”
16. Get exposure time
Command to S2000 PRO/ELITE; GTM
Response from S2000 PRO/ELITE; n (n represents a integer
number in 100’s of msecs)
Example:
If “20XX\r” is responded, the exposure time will be 2
seconds.
17. Get software versions from main board
Command to S2000 PRO/ELITE; VEB
Response from S2000 PRO/ELITE; n (n represents a integer
number)
Example:
If “10XX\r” is responded, the software version on the
main board will be 1.0.
18. Get software versions from I/O board
Command to S2000 PRO/ELITE; VIO
Response from S2000 PRO/ELITE; n (n represents a integer
number)
Example: