User's Guide

User Guide
- 29 –
13.2.3 Analog Signals
The analog I/O signals have the following characteristics:
Intensity Monitor Output
>output voltage: 1-5VDC
>maximum output current: 1mA
Intensity Control Input
>input voltage: 1-5VDC
>maximum input current: 500 µA
Four I/O signal connectors are located on the rear panel of the S2000
PRO/ELITE and one connector located is located on the right side of the front
panel. Refer to the following pages for signal descriptions and locations.
13.2.4 Blank
Table 1 “P1” Pin-Out
13.2.5 Blank