User's Guide

User Guide
- 20 –
9.1.12 When the CAL button is pressed for less than 5 seconds, and then released,
the radiometer will send the set point to the S2000 PRO/ELITE thus setting the
S2000 PRO/ELITE in the absolute mode. Additionally, the current light guide
diameter value selected by the radiometer will be transferred to the S2000
PRO/ELITE. This light guide diameter will be used by the S2000 PRO/ELITE to
calculate the proper output irradiance in W/cm2.
9.1.13 For detailed operating instructions regarding calibration of the S2000
PRO/ELITE, refer to the R2000 user’s guide.
RADIOMETER
CALIBRATION CABLE
S2000
PRO/
LIGHTGUIDE