User's Guide

User Guide
- 15 –
6.1.6 Locate the 4-pin Intelli-Lamp sensor connector at the rear of the lamp module
and connect it to its mate located on the top of the lamp-housing wall.
6.1.7 Locate power connector with two leads and connect it to its mate located on
the side of the lamp-housing wall.
INTELLI-LAMP
CONNECTOR
POWER
CONNECTOR
Tip: the Intelli-lamp connector will only attach in the correct orientation. If
you are having difficulty attaching the connector, try rotating it by 180º.
Note: if the Intelli- lamp connector is not installed correctly, the lamp will not
strike and the “bulb” message will display when POWER is turned on
to the unit.
CENTER BAR AND LEAD WITHIN
THE CUTOUT.