User's Guide

User Guide
- 14 –
6.1.4 As illustrated below position the lamp facing towards the front of the unit with
the POWER leads facing towards you. The lamp should be aligned so that the
leading edge of the reflector (lamp rim) fits into the mounting groove on the
lamp holder assembly.
Figure 4 Lamp Direction
6.1.5 Make sure the middle of the lamp is in position to fit into the spring clamp. Slide
the lamp until it snaps into the spring clamp. The leading edge of the reflector
(lamp rim) should fit snugly into the lamp holder recess.
CERAMIC
COMPONENT
LAMP HOLDER
LAMP RIM
POWER LEADS
SPRING CLAMP
Figure 5 Lamp Connection