User's Guide

User Guide
- 13 –
Caution!
The lamp module’s operational life can be significantly shortened if handled
incorrectly. Be sure only to handle the ceramic surfaces and the lamp rim.
Do not touch the bulb’s glass envelope or the inside surface of the reflector.
Skin oils can cause the lamp module to fail prematurely.
6 Installing the Lamp Module
The S2000 PRO/ELITE curing system can detect and adjust its parameters for all
lamp options offered with the product. Please follow these steps to install the lamp.
6.1.1 Be sure the AC POWER cord is disconnected from the unit.
6.1.2 Remove the screw from the lamp housing side panel using the tool provided
and remove the panel from the unit cover.
Figure 3 Lamp Housing Panel
6.1.3 Carefully remove the lamp module from its container, holding only the ceramic
component and lamp rim.
LAMP HOUSING
SIDE PANEL
Note: Refer to Section 3 – Safety Precautions before proceeding