Excel G5 user manual © 2008 VAN OS MEDICAL UK LTD., Corunna House Business Centre, 42-44 Ousegate, Selby, North Yorkshire, YO8 4NH Tel. +44(0)1757 701177, Fax +44(0)1757 706011, E-mail: sales@vanosmedical.com, www.vanosmedical.
Excel G5 user manual YOU AND / OR YOUR ATTENDANT MUST READ AND FULLY UNDERSTAND THIS MANUAL BEFORE USE General information You have just bought a Van Os Medical UK Ltd wheelchair and we want to thank you for the confidence in our EXCEL ® products. The EXCEL ® wheelchair is a quality product. It is adjustable in many different ways and can also be easily upgraded. The policy of Van Os Medical UK Ltd is to continually improve the quality and reliability of our products.
Excel G5 user manual Contents 1. IDENTIFICATION ........................................................................................................................................................ 4 2. GENERAL EXPLANATION CONCERNING YOUR WHEELCHAIR .............................................................................. 5 2.1 2.2 3. COMPONENTS OF THE WHEELCHAIR ...............................................................................................................................
Excel G5 user manual 1. IDENTIFICATION Your wheelchair is equipped with a unique identification number. You can find this number on the cross frame of your wheelchair. Below is an example of the frame label you can find the identification number. Furthermore you will find the explanation of the various data stored on the frame label listed. 3 2 1 5 6 4 7 1. Production Date The date on which your wheelchair was made. 2.
Excel G5 user manual 2. GENERAL EXPLANATION CONCERNING YOUR WHEELCHAIR 2.1 1 Components of the wheelchair 2 17 17 16 3 4 15 5 18 6 14 7 8 9 13 10 11 12 1 2 3 4 5 6 7 8 9 Back upholstery Push handle Backrest Hoop Rear wheel Brake Axel bracket Anti-tip Cross bar 10 11 12 13 14 15 16 17 18 Bearing house Front fork Front wheel (swing castor) Foot plate Foot rest Seat upholstery Armrest Backrest tensionbar Backrest incl.
Excel G5 user manual 3. SAFETY REGULATIONS VAN OS MEDICAL UK Ltd specifically disclaims responsibility for any body injury or property damage which may occur during any use which does not comply with laws or ordinances. If used correctly, the Excel wheelchair is an utmost safe and stable product, if the instructions for use as described in this manual are followed. However, it is possible when the Excel wheelchair is not used correctly, dangerous situations may occur. 3.
Excel G5 user manual - A ‘wheelie’ is extremely dangerous to the user and will cause serious damage to the wheelchair 3 - Never connect anything to the wheels, this may cause damage to the chair and also effect the balance of the chair and may injure the user; Do not stand on the footrest this will cause the chair to tip and injure the user (figure 4); 4 - For suitable protection of potential obstruction the lowest point of the footrests serves minimum 7 cm free of the ground; Place the wheelchair on a
Excel G5 user manual 4. INSTRUCTIONS FOR USE You will have to learn the characteristics of your wheelchair. It is most important to learn the safest methods to develop the daily activities in accordance to your life style. Consult your medical advisor or therapist for assistance by developing safe and effective techniques for your daily activities and your physical possibilities. 4.
Excel G5 user manual Reaching / bending sideward 1 2 3 Manoeuvre the chair as close as possible to the object you want to reach; Ensure that the front wheels are fully turned to the front.
Excel G5 user manual If you alone on the pavement wish to go up, you should move your weight as far forward as possible by bending forward. Then you must provide a so-called 'Wheelie', to get the front wheels on to the curb, to allow you to climb the curb (see Figure 3, under the heading "Warnings for safe use). You can only perform this action if you have practiced it with a trained expert. Going down the pavement: If you want to go down the pavement, we advise you to do this with an attendant.
Excel G5 user manual We recommend you to use anti-tip wheels. Depending on the model of your Excel wheelchair sometimes these are a standard item and sometimes they are an optional extra. They prevent you from tipping the wheelchair over backwards (Figure 12). Do not carry any weight on the back of the wheelchair whilst ascending (Figure 13). This changes the balance and increases the chances of tipping backwards.
Excel G5 user manual 4.4 Going up and down stairs Stairs are one of the largest obstacles for wheelchair users. However, with a little help from others it is possible to climb up and downstairs when a wheelchair lift is not available. You must be aware of the rather heavy weight to be placed. We advise climbing stairs with a wheelchair with the help of a minimum of two attendants. You must always face the rear wheels towards the stairs.
Excel G5 user manual MAKING ADJUSTMENTS TO YOUR WHEELCHAIR CAN CAUSE BIG RISKS FOR YOUR SAFETY AND THE FUNCTION OF YOUR WHEELCHAIR ADJUSTMENTS MADE BY YOURSELF ARE STRONG ADVISED AGAINST AND CARRIED OUT AT YOUR OWN RISK ALWAYS SEEK ADVICE FROM AN APPROVED DEALER BEFORE MAKING ADJUSTMENTS 5. INSTRUCTIONS FOR USE AND OPPORTUNITIES IN YOUR WHEELCHAIR In this chapter we will explore all the possibilities that you have with your wheelchair.
Excel G5 user manual Transport Weight Maximum User Weight 5.2 8.4 kg 130 kg (150 kg in seat width 50cm and 55cm) Opening and closing the wheelchair Opening the wheelchair From the folded position stand to the side of the wheelchair. - Hold the armrest of the side closest to you, and tilt the wheelchair slightly towards you. - Push the seat side tubes downwards, this will unfold the wheelchair. - Then, to full open the wheelchair, push the side tubes of the seat frame into place, see Figure 1.
Excel G5 user manual - Pull the black control lever to release the footrest, see Figure 5 You can now move the complete footrest inwards or outwards without removing it Removing the footrests from your wheelchair - Fold the footplate away (see earlier in this chapter) - Pull the black control lever, as shown in Figure 5.
0 Excel G5 user manual 5.4 Using the elevating leg support (optional) Swinging the elevating legrest(s) away - Pull the black button upwards, see Figure 10 - You can now swing your elevating legrest(s) inwards and outwards Removing the elevating legrest(s) from your wheelchair - Pull the black button upwards, see Figure 10.
Excel G5 user manual 5.5 Using the calf plate Folding the calf plate back - Get a hold of the calf plate and put it into the position shown on the first picture of figure 14. rotate around the legrest as shown on the last two pictures of figure 14. Figure 14 Setting angle of the calf plate - Hold the calf plate on the inside and by moving up and down, find the correct angle, see figure 15 - If the calf plate is too stiff to move then you can use the supplied wrench (No. 6) to loosen.
Excel G5 user manual 5.6 Using an amputee support Swinging the amputee support away - Pull the black control lever, see figure 18 - You can now swing the amputee support inwards and outwards Removing the amputee support from your wheelchair - Pull the black control lever, see figure 18.
Excel G5 user manual Setting the length of the amputation support In order to set the length of the amputation support, you require the supplied wrench number 5 - Remove the four screws with the wrench, see figure 22. You can now move the black tube around the silver tube - Move the amputee support to the desired position - Make sure all screws tightened. 5.
Excel G5 user manual 5.8 Using the armrest Flipping the armrest backwards If you are in the wheelchair - Where the front of the armrest meets the frame you will find a black lever. Pull the black lever to the frame, see figure 27 - You can now swing the armrest backwards because it will be attached to the frame at only one point at the rear of the armrest - To put the armrest back in place you must reverse the previous steps.
Excel G5 user manual Adjusting the armrest height (optional armrest) To adjust the height of this armrest, you have to use the supplied wrench number 4 - Loosen the screw with the supplied wrench, see figure 30 - Move the armrest to the correct height and tighten the screw back down - Make sure the screw and armrest are both in place Figure 31/32 Figure 30 Push handles height-adjustable - Turn the black lever, until you can move push handles.
Excel G5 user manual Backrest angle setting (optional models) On your wheelchair you have the opportunity to adjust the angle of the back. We advise that this procedure is conducted by an authorized @ Excel dealer. 5.10 Using the rear wheel and anti-tip wheels Removal of the rear wheel You can remove your rear wheels using the quick release system in the following way: - Tilt your wheelchair slightly so the wheel you wish to remove is slightly off the ground, see figure....
Excel G5 user manual Using the anti-tip wheels - Go stand to the back of the wheelchair; - When you get down to your knees you will see the operating system of the anti-tip wheels, see figure 35; - Retracting the silver round (figure 36) Will cause the anti-tip wheel to slide; - Let go of the silver round when the anti-tip wheel touches the ground; - Make sure the anti-tip wheel is fastened correctly and does not move anymore.
Excel G5 user manual items before transporting your wheelchair in a car or on a mini bus. We advise you to make contact with the carrier, your supplier and/or an approved manufacturer of taxi fixation systems for advice on an adequate system if you want to transport your wheelchair Figure 42 5.13 Use of the headrest (optional item) Removing the headrest - You can remove the headrest by using the black buttons (figure 43). On both sides fully loosen to run off the push handles.
Excel G5 user manual - Turn the lever back until they are tight and possibly do the same with the other levers (if an adjustment is required) Make sure the head is secure in place and that the three levers are not obstacles MAKING ADJUSTMENTS TO YOUR WHEELCHAIR CAN CAUSE BIG RISKS FOR YOUR SAFETY AND THE FUNCTION OF YOUR WHEELCHAIR ADJUSTMENTS MADE BY YOURSELF ARE STRONG ADVISED AGAINST AND CARRIED OUT AT YOUR OWN RISK ALWAYS SEEK ADVICE FROM AN APPROVED DEALER BEFORE MAKING ADJUSTMENTS © 2008 VAN OS MED
Excel G5 user manual 6. TRANSPORT AND TRANSIT IN CAR Your Excel wheelchair is designed to be easily transported by car. Your wheelchair is foldable so the total width is limited to an average measure of 20 cm. Further your wheelchair is equipped with swing away detachable footrests. At the same time some wheelchairs can be equipped with a couple of size decreasing accessories, like quick release (detachable) rear wheels and a foldable backrest. 6.
Excel G5 user manual 7.1 Tyres Examine tyres periodically for wear and replace them as needed. Pneumatic tyres should be checked weekly for correct tyre pressure, which is recommended on the tyre, with a standard car or bicycle tyre pressure gauge. If tyres do not have equal pressure, the chair will seem to pull to the side of the tyre with less pressure. This may also harm the driving comfort and will mean you have to exert more effort to move the wheelchair.
Excel G5 user manual 7.6 Upholstery It is important to check the lining of your wheelchair regularly. Torn or worn upholstery can no longer support human weight and this can create dangerous situations. - Check the textile coating for holes, cracks and worn spots; - Check the upholstery-mounting grommets to make sure that they are all correctly aligned and secure. 7.7 Cleaning Clean chassis with a mild soap and water solution. The chassis paint does not need to be waxed.
Excel G5 user manual dealer, or Van Os Medical UK Ltd. © 2008 VAN OS MEDICAL UK LTD., Corunna House Business Centre, 42-44 Ousegate, Selby, North Yorkshire, YO8 4NH Tel. +44(0)1757 701177, Fax +44(0)1757 706011, E-mail: sales@vanosmedical.com, www.vanosmedical.
Excel G5 user manual 9. WARRANTY 9.1 Warranty application 10 years COMPONENT 2 years None Together with your wheelchair you get the factory warranty. However, it is possible that your dealer offers a supplementary warranty. This manual only handles the factory warranty as given by Van Os Medical UK Ltd. This warranty is only granted to the consumer and is not intended to be used commercially (like hiring or institutional use) and could not be changed in any way.
Excel G5 user manual In normal circumstances no responsibility is accepted when the wheelchair needs replacement or repair as a direct result from: Not maintaining the wheelchair and parts according to the recommendations of the manufacturer, or not using the specific original parts. Damaging the wheelchair or parts by inattentive use, and accident or wrong use. Adjusting the wheelchair or parts, different from the specifications of the manufacturer, or reparations done before the service agent is warned.
Excel G5 user manual 10. SERVICE AND MAINTENANCE 10.1 General Maintenance instructions Your wheelchair needs periodical maintenance. This is necessary for a long lifetime and an optimal use comfort of your wheelchair. A badly maintained wheelchair will give more technical problems, turn less flexible and fall out the warranty terms. Preventive maintenance is most important and many of these things you can easily do yourself or a friend or family member can complete.
Excel G5 user manual 10.2 Service checklist For optimal life your wheelchair should be periodically maintained by an authorized dealer. Service interval: ................................
