User's Manual

INTRODUCTION

Thank you for purchasing the SafePresence Motion Detector. The SafePresence Motion Detector operates at 433 Mhz.

It sounds a local alarm on the sensor or transmits an alert to a pager carried by caregivers. The unit is often installed to

monitor a bed or doorway. Caregivers choose the placement and application that is best for the person in their care.

Screws (included) or Velcro® (sold separately) can be used to mount the monitor which is powered by a 9 Volt battery.

The receiver is also battery powered and has LOW or HIGH volume settings.

The SafePresence Motion Detector is only an aid for caregivers and is not designed to replace proper nursing care

including, but not limited to 1) visual monitoring 2) direct patient supervision 3) proper training for all caregivers using

the system 4) testing the system daily and before each use, and 5) immediate caregiver response to the alerts. The

Caregiver Communicator and accessories may not be suitable for all individuals.

Keep these instructions in a safe place. Keep a record of all training sessions and the following information for future

reference. This information will be needed for repairs or returns.

Serial No.: Date of Purchase:

READ THIS INSTRUCTION MANUAL THOROUGHLY BEFORE USE.

ABOUT THESE OPERATING INSTRUCTIONS

These operating instructions can be used for the SafePresence Motion Sensor Model 230. Read and follow the

instructions. If you have questions, please contact your distributor or visit www.safepresence.com.

Symbols used in these operating instructions:

This indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

This indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also

be used to alert against unsafe practices

If you have questions, please contact your distributor or visit www.safepresence.com

For assistance call your distributor or visit www.safepresence.com

SafePresence™ is a trademark of J. Brasch Co. or its afﬁ liates.

READ and follow these instructions. SAVE them for future use.

SPECIFICATIONS

SAFEPRESENCE MOTION DETECTOR

Power Source DC 9V

Working Temperature Approx. 0º and 50º C

Detection Distance 15M (50 ft.)

Horizontal Detection Range 60°

Switch State Chime / Off / Remote

Local Alarm Time 10 seconds

Vertical Detection Range 6°

Alarm Loudness >75 dB

For assistance call your distributor or visit www.safepresence.com

SafePresence™ is a trademark of J. Brasch Co. or its afﬁ liates.

READ and follow these instructions. SAVE them for future use.