Manual

With the hammer cocked, replace the bolt on the frame. Reconnect the recoil spring to the
bolt and to the barrel. Place the shroud on top of the barrel and bolt, then replace the two
screws on the top of the shroud. Now replace the bolt handle.
CARE AND CLEANING:
Normal cleaning should not require disassembly. Only disassemble the firearm if it is
extremely dirty or if the bolt is not moving freely.
The barrel and chamber should be cleaned with a bore solvent, using a brush if needed.
Wipe dry and oil lightly. Use a solvent on cotton swabs or a patch to clean all exposed
internal surfaces.
Lubricate all moving parts with a light high quality gun oil. Be sure to lubricate the
contact points between the bolt and frame. Wipe off any excess oil.
WARNING!
Avoid use of solvents on the stock or on the sights as it may cause damage.
LIFETIME WARRANTY
Excel Industries, Inc. warrants to the original retail purchaser that each firearm
manufactured by Excel Industries, Inc will be free from defects in material and
workmanship. Excel Industries, Inc. obligation under this warranty shall be limited to
repairing or replacing at its option any firearm or part thereof returned (Prepaid to Excel
Industries, Inc.) and determined by Excel Industries, Inc. to be defective in either material
or workmanship. Lifetime warranty does not cover springs, or plastic parts. A $20.00
handling charge must be included with the returned merchandise for shipping and
handling. Contact your dealer for authorization and instructions to return this firearm for
repair.
This warranty is voided by the use of reloaded, hand loaded or other non-standard
ammunition.
STATEMENT OF LIABILITY
This Rifle is classified by the Alcohol, Tobacco and Firearms Division of the Internal
Revenue Service, US Treasury Department, as a Firearm or Dangerous weapon and is