Manual

and safety manual.
• Always wear eye and ear protection when shooting.
• Never carry or store your firearm with the hammer in the cocked position.
• Always store your unloaded firearm and ammunition separately, locked if
possible, and inaccessible to children and unauthorized persons.
SAFETY:
The safety is located on the left side of the firearm. By pushing the safety lever upward as
far as possible, this will put the firearm in the safe condition. This action blocks the sear
from disconnecting from the hammer. By pushing the safety lever downward, the firearm
is now in the FIRE condition. This firearm also incorporates a firing pin block that is only
deactivated by pulling the trigger.
WARNING!
THIS FIREARM IS CAPABLE OF FIRING WITH THE MAGAZINE REMOVED!
WARNING!
This Pistol incorporates a well-designed safety device; however never rely completely on
any safety mechanism. All mechanical devices are subject to breakage, wear or incorrect
maintenance and should never be trusted.
AMMUNITION:
This pistol was designed to use standard ammunition. Use only new commercially
manufactured ammunition and only of the caliber for which your firearm is chambered.
Selected ammunition should be test fired at least 100 rounds to ensure reliability.
Ammunition manufacturers can make changes to their ammunition either dimensional, a
different powder or primer. These changes could cause a previously reliable ammunition
to cause malfunctions. One of the keys to a reliable firearm is consistent ammunition.
WARNING!
The use of non-standard, reloaded or hand loaded ammunition voids all warranties. The
use of such ammunition can cause damage to the firearm and serious injury to the shooter
or to others.
BREAK-IN PERIOD:
The normal break-in period for this pistol is 200 rounds.
LOADING:
To load the magazine push down the front of the follower with the rim of the cartridge,
then slide the round back under the magazine lips. Repeat until the magazine is loaded