User guide
6 7
The Easy-Fly Smart iCopter will be own entirely via Bluetooth with No
Additional Adapter required. The Smart iCopter has a built-in Class II Bluetooth
that allows the chopper to soar through the air with an approximate ight
radius of 33 feet (10 meters).
Note: This model is controlled by a Bluetooth signal that is subject to
interference from many sources outside your control. This interference can
cause momentary loss of control so it is advisable to always keep a safe
distance in all directions around your model, as this margin will help to avoid
collisions or injury.
Bluetooth Enabled RC Helicopter
all risks associated with lithium batteries. If you do not agree with these
conditions, return your complete Smart iCopter model in new, unused
condition to the place of purchase immediately.
• You must charge the included Li-Po battery in a safe area away from
ammable materials.
• Never charge the battery unattended. When charging the battery you should
always remain in constant observation to monitor the charging process and
react to potential problems that may occur.
• After ight, the battery must be cooled to ambient temperature
before charging .
• DO NOT USE A Ni-Cd or Ni-MH CHARGER. Failure to charge the battery with
a compatible 5V charger may cause re resulting in personal injury and/or
property damage.
Bluetooth Pairing
Before attempting to y your Smart
iCopter, please ensure that you pair via
Bluetooth.
Turn on your Smart iCopter. On your
Device, go to Settings > General
> Bluetooth > and switch it to the
“ON” position.
Once the Bluetooth locates the chopper
“Smart iCopter” will appear in the Devices
eld. If it shows as “Not Paired” simply
tap on the “Not Paired” to activate. If
done properly, it will read as “Connected”
Please note that Bluetooth uses a lot of
your iPod touch, iPhone or iPad battery
power. Be sure to turn o Bluetooth
when you are not using it to conserve
battery power.
Bluetooth Pairing
Pairing successful!
XC9847IS01EXC.indd 6-7XC9847IS01EXC.indd 6-7 8/1/12 5:08 PM8/1/12 5:08 PM