Service manual

PREPARATION

A. Major System Components

9. A Sediment Pre-filter, shrink wrapped. The following components comprise the Reverse

Osmosis Drinking Water System. (Refer to Fig. 1,

below for general system layout.)

10.An activated Carbon Pre-filter, shrink

wrapped.

1. A Reverse Osmosis Manifold assembly 11.An In-Line Activated Coconut Shell

Carbon Post Filter.

2. Housings and Housing O-rings.

3. A Drinking Water Holding Tank.

4. A Dispensing Faucet.

5. A Feed Water Ball Valve.

6. A Drain Clamp.

12.Other items necessary for installation may

include wood screws or machine screws

and nuts for mounting the manifold, or

concrete anchors for hanging on

basement wall. Additional tubing or tube

connectors. Plastic wire ties for

organizing tubing.

7. Plastic Tubing and tube connectors. 13. Installation Kit

8. A Reverse Osmosis Membrane sealed in a

plastic bag.

BALL