Specifications

UNPACKING

Carefully unpack and remove the Rip Fence System and its components from the box and check for missing or

damaged items as per the list of contents below.

NOTE: Please report any damaged or missing items to your GENERAL® INTERNATIONAL distributor immediately.

LIST OF CONTENTS

Qty

FENCE. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

RESAW GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

FRONT RAIL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

REAR RAIL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

MEASURING TAPE . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

LOCK KNOB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

HEX NUT 1/4”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

BOLT (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

FLAT WASHER 1/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

TO REDUCE THE RISK OF DAMAGE TO THE BANDSAW, THE FENCE SYSTEM OR THE WORK PIECE, AS WELL AS THE POTEN-

TIAL FOR PERSONAL INJURY, AFTER INITIAL SET-UP AS WELL AS BEFORE EACH USE, MAKE SURE THAT EVERYTHING IS

SECURELY INSTALLED AND THAT ALL FASTENERS AND MOVING PARTS ON THIS FENCE SYSTEM ARE LOCKED IN PLACE

BEFORE STARTING THE BANDSAW.

LOCK WASHER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

HEX NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

FRONT MOUNTING BRACKET . . . . . . . . . . . . . . . . . . 2

REAR MOUNTING BRACKET . . . . . . . . . . . . . . . . . . . 2

LOCK KNOB 5/16” X 5/8”. . . . . . . . . . . . . . . . . . . . . 2

SCREW 5/16” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

SQUARE NUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

FLAT WASHER 5/16” . . . . . . . . . . . . . . . . . . . . . . . . . . 2

* R BOLT 1/4” . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

*Models 90-170/90-170B, 90-290 and 90-380 only.

Once the parts have been removed from the packaging, you should have the following items:

Qty