Specifications

Excalibur Multirate DAP Installation and Operation
5-8
Several parameter screens display the words Inc, Dec, and Accpt on the bottom line.
For example:
L T x L v l U p p r T h r s h = + 1 5 d b
I n c D e c A c c p t
This means that to change this parameter, you must increase or decrease its current value
(rather than select from a list of possible options). When this type of screen is displayed,
a cursor appears beneath the rightmost digit. To increase its value, press the button
beneath Inc; to decrease the value, press the button beneath Dec. When you change the
value of a digit, a C appears in the lower right corner of the screen. To move the cursor
to the next digit, press the < button. When the desired value is displayed on the top line,
press the button beneath Accpt to enter it.
The remainder of this chapter discusses the parameters contained within each of the
parameter submenus.
DAP Parameters
The DAP submenu contains the parameters which control basic DAP operation and allow
you to configure the unit to the DTE's operating characteristics. Table 5-2 lists these
parameters along with their possible settings. Parameters are listed in the order that they
appear on the screen. The screen abbreviation for each parameter is shown in
parenthesis.