Specifications

Defining Operating Parameters
5-5
Entering the Configuration Menu
To define the rest of the DAP's operating parameters, you must enter the Configuration
menu. To do so, follow these steps, starting from the Top Level menu:
1. To configure the local DAP, press the 1 button. To configure the remote DAP,
press the 2 button.
1 234
Escape
Top
E x c a l i b u r D A P
L o c a l R e m o t A d d r s S e r v e >
<
>
2. Press the 2 button to enter the Configuration menu.
1 234
Escape Top
L
L o c a l M o d e
S t a t s C o n f g D i a g D i a l >
<
>
3. The screen now displays the first four parameter submenus. Press the > button to
scroll through the remaining submenus.
Note: Several parameters in the Configuration menu are dependent upon the service
used. A parameter that is not applicable to the service you are connected to will not be
displayed.
1 234
Escape Top
L
C o n f i g u r a t i o n M o d e
D A P A l i a s R C P P R a t e >
L
C o n f i g u r a t i o n M o d e
< P R a t e D i a l T h r s h C h n n l >
<
>
L C o n f i g u r a t i o n M o d e
< C h n n l U s e r S y s t m