Specifications

Defining Operating Parameters
5-3
5. Press the button beneath Rate.
Escape Top
D D S N I C o n f i g u r a t i o n
R a t e M P F r m
6. The screen now displays the current line rate and possible options. Press the
button beneath the desired setting. The top line of the screen displays the service
and the bottom line of the screen displays the new line rate and maximum DTE
rate.
Escape Top
D a t a R a t e = 9 6 0 0
5 6 0 0 0 1 9 2 0 0 9 6 0 0 4 8 0 0 >
S e r v i c e = D D S N I
R a t e = 5 6 . 0 U s a b l e = 5 2 . 8
Press the Escape button twice to return to the DDSNI Configuration submenu.
7. Press the button beneath MPFrm. When this parameter is enabled your unit can
be connected to a multidrop network made up of Excalibur Multiport DAPs, and
can interface to any one channel in the aggregate data stream. The DAP can
operate as a multidrop central or remote.
Escape Top
D D S N I C o n f i g u r a t i o n
R a t e M P F r m