Specifications

Excalibur Multirate DAP Installation and Operation
5-2
For all services except DDSNI and C64NI, the line rate will equal the DTE rate. The
maximum main channel (DTE) data rates for DDSNI and C64NI services are listed in
Table 5-1. For DDSNI and C64NI you can also set the DTE interface to operate at a
lower data rate than the DDS line rate when Rate Adaption is enabled. See "Port Rate
Configuration" in this chapter for a complete description of this feature.
If you wish to set the service for DDSNI or C64NI, skip to Step 4. For all other services,
follow Step 3.
3. The screen now displays the current line rate and possible options. Press the
button beneath the desired setting. The top line of the screen displays the service
and the bottom line of the screen displays the new line rate and maximum DTE
rate.
Escape Top
D a t a R a t e = 9 6 0 0
5 6 0 0 0 1 9 2 0 0 9 6 0 0 4 8 0 0 >
S e r v i c e = D D S
R a t e = 5 6 . 0 U s a b l e = 5 6 . 0
Press the Escape button twice to return to the Service menu.
4. Press the button beneath DDSNI or C64NI.
Escape Top
S e r v i c e = D D S
D D S D D S N I D D S S C L D M >