Specifications

5-1
Chapter 5
Defining Operating Parameters
Overview
This chapter explains how to configure the DAP's operating parameters to suit your
particular network requirements. The beginning of the chapter contains step-by-step
instructions that show you how to define operating parameters using the front panel
buttons and display. The remainder of the chapter describes the parameters in detail. It
contains tables that list each parameter and its possible settings, followed by descriptions
of each parameter that help you decide which setting is correct for your application.
Entering the Service Menu
The first DAP operating parameters that must be defined are the service and the DTE
speed. To define these parameters, you must enter the Service menu. To do so, follow
these steps, starting from the Top Level menu:
Note: In the illustrations that follow, the shading indicates which button to press.
1. To enter the Service menu, press the 4 button.
Escape Top
E x c a l i b u r D A P
L o c a l R e m o t A d d r s S e r v e >
2. The screen displays the current service setting and possible options. (Press the >
button to display additional options.) This parameter setting must correspond
with your dedicated line connection. Press the button beneath the correct service.
Escape Top
S e r v i c e = D D S
D D S D D S N I D D S S C L D M >