Specifications

Excalibur Multirate DAP Installation and Operation
4-8
Establishing Password Protection
The Excalibur Multirate DAP allows you to establish password protection over any or all
of the following front panel functions: configuration (including secondary channel
configuration), diagnostic testing, remote control panel, dial backup, Digital Data Service
Mode, and the T7 address. To establish password protection, you must enter the correct
password and then lock the desired front panel functions. When a function is locked, the
operator must enter the correct password to unlock it.
If your DAP is equipped with the Analog or the ISDN IDBU feature, you can establish a
security identification code for dial backup operation. The code can be any 4-digit
number from 0001 through 9999. When the answering unit has this feature enabled
during dial backup operation, the calling unit must have the same 4-digit code or the units
will not switch to dial backup operation.
Entering the Password
When the Excalibur Multirate DAP is shipped from the factory, the predefined password
is RMI. To enter this password, follow these steps, starting from the Top Level menu:
1. Press the 1 or 2 button depending on which DAP (local or remote) you wish to
establish password protection for.
1 234
Escape
Top
T
E x c a l i b u r D A P
L o c a l R e m o t A d d r s S e r v e >
<
>
2. Press the > button.
1 234
Escape Top
L
L o c a l M o d e
S t a t s C o n f g D i a g D i a l >
<
>