Specifications

Configuration - Alias, RCP, and Port Rate Notes
1. This parameter does not appear on the screen when the Clear Secondary Channel parameter is enabled. 2. This parameter appears on the screen only when the service is set for DDS, DDS-SC, or LDM. It does not appear for
DDS-SC or LDM when the Clear Secondary Channel parameter is enabled. The unit defaults to Excalibur.
3. This parameter appears on the screen only when the service is set for DDS. 4. This parameter does not appear on the screen if the unit is set for a remote unit in a multipoint network. 5. This parameter appears on the screen only for units equipped with the Analog or ISDN IDBU option. 6. This parameter appears on the screen only when the service is set for DDSNI or C64NI and the Multiport Framing
parameter is set to disabled. The available DTE data rates are dependent on the DDS line rate. Possible displays are: (a) Synchronous - 1.2 to 52.8 Kbps in multiples of 1200 bps (except 3.6 and 6 Kbps are not provided), 56, 57.6 Kbps,
and none.
(b) Asynchronous - 75, 150, 300, 600, 1200 bps and 1.2, 2.4, 4.8, 7.2, 9.6, 12, 14.4, 16.8, 19.2, 24, 28.8, 48, 57.6 Kbps,
and none.