Specifications

C-2
Status Notes
1. The top line of the Top Level Menu displays
Excalibur DAP
for units without dial backup,
DAP +4W 56K DBU
for
units equipped with the Switched 56 IDBU option,
DAP + 2 wire 14.4K DBU
for units equipped with the Analog
IDBU option, or
DAP + ISDN DBU
for units equipped with the ISDN IDBU option.
2. This parameter appears on the screen only for units equipped with the Analog, Switched 56, or ISDN IDBU option.
3. This parameter appears on the screen only when the service is set for DDSNI, the Location parameter is set to central,
and the Network parameter is set to multipoint in the DAP Configuration submenu.
4. When the unit is equipped with the Analog, Switched 56, or ISDN IDBU option, the screen displays
Dial=Y
or
Dial=N
in place of
Svc=DDSNI
.
5. This parameter appears on the screen only when the service is set for DDSNI, the Location parameter is set to central,
the Network parameter is set to multipoint, and the Automatic Poll parameter is set to disabled.
6. This parameter appears on the screen only when the service is set for DDSNI, the Location parameter is set to central,
the Network parameter is set to multipoint, and the Automatic Poll parameter is set to enabled.
7. This parameter appears on the screen only when the service is set for DDSNI and the Multiport Framing parameter is set
to enabled.