Specifications

Excalibur Multirate DAP Installation and Operation
1-4
Table 1-1. Excalibur Multirate DAP Part Numbers (Continued)
Part Number Description
15-05B613B00xx CCITT V.35 with Switched 56 IDBU DAP, Central Site (CS-1), Aggregate Card
Part No. 15P0501D-3
15-05B713B00xx CCITT V.35 with Switched 56 IDBU DAP, Central Site (CS-2), Aggregate Card
Part No. 15P0501D-3
15-09B112C01xx RS-232-E with ISDN U IDBU DAP, Standalone, Aggregate Card Part No.
15P09AA-6
15-05B213C00xx RS-232-E with ISDN U IDBU DAP, Central Site (CS-1), Aggregate Card Part No.
15P0501D-3
15-05B313C00xx RS-232-E with ISDN U IDBU DAP, Central Site (CS-2), Aggregate Card Part No.
15P0501D-3
15-09B512C01xx RS-232-E/CCITT V.35 with ISDN U IDBU DAP, Standalone, Aggregate Card Part
No. 15P09AA-6
15-05B613C00xx CCITT V.35 with ISDN U IDBU DAP, Central Site (CS-1), Aggregate Card Part
No. 15P0501D-3
15-05B713C00xx CCITT V.35 with ISDN U IDBU DAP, Central Site (CS-2), Aggregate Card Part
No. 15P0501D-3
15-05B313600xx RS-232-E EDRS DAD, Central Site (CS-2), Aggregate Card Part No. 15P0501D-3
15-05B713600xx CCITT V.35 EDRS DAD, Central Site (CS-2), Aggregate Card Part No.
15P0501D-3
* xx denotes the software revision level.
Standalone Model
The standalone Excalibur Multirate DAP is housed in a 3"x8"x12" (7.6 cm x 20.3 cm x
30.5 cm) plastic housing. The housing consists of a top and bottom half, fastened
together with two screws. The front and rear panels slide vertically into the bottom half
of the housing and are held in place by the top half. The DAP can be placed on any flat
surface or it can be mounted in a standard 19-inch wide rack (using an optional kit).
The DAP's front panel contains an LCD information screen, two LED indicators, and
eight pushbuttons. The rear panel contains the interface connectors used to attach to the
DTE, telephone lines, and other network components. The unit is powered by an external
power supply operating at 92 to 127 VAC.