Specifications

On-Line Operation

6-27

2. Press the button beneath the target type for which you wish to enter a telephone

number. (To display Alternate 4 and Temporary, you must first press the >

button.)

234

Escape

TopL

C h o o s e T a r g e t P h # T y p e

P r i A l t 1 A l t 2 A l t 3 >

C h o o s e T a r g e t P h # T y p e

< A l t 3 A l t 4 T e m p

3. Use the 1 and 2 buttons to enter the desired character in each space. Table 6-2

lists the different characters that you can enter in the telephone number when the

unit is equipped with the Analog or ISDN IDBU. The Switched 56 IDBU uses

pulse dialing only. The characters that you can enter in the telephone number are

digits 0 through 9. When the DAP is connected to Sprint's Enhanced Switched

56 Service, you can also enter S (enable call progress sensing) and N (disable call

progress sensing). The characters in a telephone number override any parameter

setting. Use the < and > buttons to move from space to space. The flashing >

arrow in the right corner of the screen indicates that there are more available

spaces to the right. When you move the cursor past the 18th space, a flashing <

arrow appears in the left corner.

Escape

Top

P r i m a r y P h # =

I n c D e c A c c p t O t h e r

If you wish to insert a character between two entered characters or delete an entered

character, follow Step 4. If you wish to copy an entered character, enter an M (without

having to scroll to it), or enter a blank space, follow Step 5. If you do not wish to use any

of these options, skip to Step 6.