Specifications

Excalibur Multirate DAP Installation and Operation
6-26
The Dial submenu allows you to perform the following functions.
• Enter telephone numbers.
• Enter the Service Profile Identification (SPID) number for units equipped with
the ISDN IDBU feature.
• Originate dial backup calls.
• Disconnect dial backup calls.
• Initiate dial line tests.
The following sections describe each of these procedures.
Entering Telephone Numbers
For both automatic and manual call origination to function properly, you must enter into
memory the telephone number of the DAP you wish to call (referred to as the Target).
You may enter a primary and up to four alternate telephone numbers for this DAP. The
numbers can be a maximum of 32 digits long. When the DAP is set for automatic
origination, only the primary number will be dialed.
In addition to the primary and alternate telephone numbers, you may also enter a
temporary telephone number. Enter a temporary telephone number when you wish to
place a manual call to a different site.
To enter telephone numbers into memory, follow these steps, starting from the Dial
submenu:
1. Press the button beneath Phon#. The screen displays the target types.
1 234
Escape
Top
L
D i a l M o d e
C a l l P h o n # T e s t S P I D
<
>