Specifications

Defining Operating Parameters
5-57
2. To change the current setting of a condition, press the button beneath it. The
revised setting is then displayed.
1 234
Escape Top
L
U s e r L E D , + = O N , - = O F F
+ A l r m - A S t r - C a l l - D i a l
L
U s e r L E D , + = ON , - = O F F
+ A l r m - A S t r - C a l l + D i a l
<
>
Turning off the User LED
When the User LED is lit, the User submenu contains an additional parameter labeled
Clear. To turn off the User LED, press the button beneath this parameter.
You can also turn off the User LED by using the RTN (Return to Normal) function as
described in the "RTN Function" section in Chapter 7.
Alias Parameter
The Alias submenu allows you to assign an alphanumeric name to the DAP. This name
appears in the Top Level menu display. This feature is designed to make it easier to
identify your DAPs in large central site installations.
To assign an Alias to the DAP, follow these steps, starting from the Configuration Mode
menu:
1. Press the button beneath Alias. The screen displays the current Alias on the
top line, with a cursor located beneath the leftmost space.
1 234
Escape Top L
C o n f i g u r a t i o n M o d e
D A P A l i a s R C P P R a t e >
<
>