Specifications

Defining Operating Parameters
5-25
5. Press the button beneath the desired setting. The top line of the screen displays
the revised setting. Press the Escape button to return to the channel number list
display.
1
2
34
Escape
Top
L
C 1 = 2 4 0 0
5 2 8 0 0 5 1 6 0 0 5 0 4 0 0 4 9 2 0 0 >
L
C 1 = 4 9 2 0 0
5 2 8 0 0 5 1 6 0 0 5 0 4 0 0 4 9 2 0 0 >
<
>
6. Repeat Steps 4 and 5 until all the channel speeds are set. Then press the Escape
button to return to the Channel Speed submenu. You must press the button
beneath Accpt to enter the DTE data rates into memory. If you try to enter an
invalid configuration, caused by exceeding the aggregate channel bandwidth, an
error message will appear on the screen. If you do not press the button beneath
Accpt before pressing the Escape button, a prompt will appear on the screen
asking if you want to accept the changes.
1 234
Escape Top
L
C h a n n e l S p e e d s
D e f i n D s p l y A c c p t
<
>
7. If you wish to display the current data rate setting for each channel, press the
button beneath Dsply. The screen then displays channel 1's current data rate.
Press the button beneath each channel number for which you want to display the
current data rate.
1
2
34
Escape
Top
L
C h a n n e l S p e e d s
D e f i n D s p l y A c c p t
L
C 1 = 4 9 2 0 0
C 1 C 2 C 3 C 4 >
<
>