Installation manual

Filter - Sulphur Filter regeneration is to occur today, an arrow will
point to regeneration on the Value Iron Filter - Sulphur Filter. For
immediate regeneration simultaneously press and hold the REGEN
button for 3 seconds on the Value Iron Filter - Sulphur Filter.
When the Value Iron Filter - Sulphur Filter is in regeneration, step
through the different regeneration cycles by pressing the Regen
button on the Value Iron Filter - Sulphur Filter until complete and back
to present time of day.
User please note:
Do not attempt to go further into Value Iron Filter - Sulphur Filter
programming other than time of day or regeneration on the Value Iron
Filter - Sulphur Filter unless you have a full and comprehensive
understanding of the VaIue Iron Filter - Sulphur Filter programming
and all features. Incorrect settings on the Value Iron Filter - Sulphur
Filter may result in a labour service charge.