Service manual

REVERSE OSMOSIS PREPARATION

A. Reverse Osmosis Components

The following components comprise the Reverse

Osmosis Drinking Water System. (Refer to Fig. 1,

below for general system layout.)

9. Reverse Osmosis Sediment Pre-filter,

shrink wrapped.

10.Reverse Osmosis activated Carbon Pre-

filter, shrink wrapped.

1. Reverse Osmosis Manifold assembly 11.Reverse Osmosis In-Line Activated

Coconut Shell Carbon Post Filter.

2. Filter Housings with O-Rings 12.Other items necessary for Reverse

Osmosis installation may include wood

screws or machine screws and nuts for

mounting the manifold, or concrete

anchors for hanging on basement wall.

Additional Reverse Osmosis tubing or

tube connectors. Reverse Osmosis

Plastic wire ties for organizing tubing.

3. Water Storage Holding Tank

4. Designer Water Dispensing Faucet

5. Self Piercing Feed Water Saddle Valve

6. Reverse Osmosis Drain Clamp.

7. Installation tubing and connections 13. Reverse Osmosis Installation Kit

8. Membrane in sealed bag

BALL