Specifications

16
L510010-04
ENGINE ALARM SYSTEM (IF EQUIPPED)
The PCM engine electronic system is programmed to
control the engine alarm system. This system utilizes
an audible alarm and/or optional indicator lamps to warn
the operator of possible engine problems, and that the
engine have entered the “Power Reduction” mode as
covered earlier in this manual.
The alarm has a “self” checking feature programmed into
the system. This feature will sound the alarm for two
short pulses upon initial start-up of the engine.
If the alarm sounds during operation, immediately throttle
back to idle speed. Observe the indicator lamps to
locate the problem circuit. The engine should be shut off
to prevent damage to the engine.
NOTICE: Some boat builders may install their own
alarm system. It is recommended that the boat owner
check with his or her boat dealer for an explanation of
the particular alarm system upon initial delivery.
OPERATING INSTRUCTIONS - 5










