Installation manual

D) SHUTOFF POSITION
The inlet handles points to the centre of the bypass valve
and the outlet points to the direction of flow. The water is
shut off to the plumbing system. If water is available on the
outlet side of the Water Softener, it is an indication of water
bypass around the system.
WATER SOFTENER STARTUP INSTRUCTIONS
• After Water Softener installation is completed and checked for
leaks, rotate the bypass valve handles to the bypass position.
• Fully open a cold water tap to release air pressure from
plumbing system. Allow water to run until the plumbing system
is rid of debris, which may have occurred during installation.