- Excalibur Electronics Inc. Radio User Manual

Using Your
3-in-1 Classic Radio
Your 3-in-1 Classic Radio can
tune into AM/FM radio stations,
play CDs, and it also lights up.
First, unpack all parts and
remove protective packing
around unit. Then plug the cord
into an electrical three prong
outlet.
To listen to the
record player:
Follow these steps carefully:
1. There is a screw protecting
the record players TURNTABLE.
Remove screw as shown in
Figure 1. If this is not removed,
you will not be able to play any
records.
2. Turn the power on.
3. Slide the MODE switch
(RADIO/PHONO/CD) to PHONO, as
shown in Figure 2.
4. Select record speed-
33/45/78. See Figure 3.
5. Place
a record onto
the turntable
(use the
45 RPM
adapter
provided,
when playing
a single.)
6. Lift the
RECORD
PLAYER
-ARM from the arm-rest
holder. See Figure 6.
7. Lift the QUE-LEVER and
move the RECORD PLAYER-ARM
gently to the desired position
over the record.
8. Lower the QUE-LEVER
slowly to meet the record’s sur-
face.
9. Turn the
VOLUME control
knob clockwise to turn unit on.
Adjust the volume by turning
the VOLUME knob.
10. To stop the record, lift the
RECORD PLAYER-ARM away
from the surface of the record
and return it to its resting place.
FIGURE 1: There is a
screw protecting the record players
cabinet. Remove
screw as shown above.
If this is not removed, you
will not be able to play
any records.
REMOVE SCREW
FIGURE 2: Slide the MODE switch
(RADIO/PHONO/CD) to PHONO.
8
FIGURE 3: Select
record speed-
33/45/78.
RECORD PLAYER-ARM
QUE-LEVER
FIGURE 4:
Lift the tone
arm from the
arm-rest holder.
Lift the QUE-LEVER
and move
the
RECORD PLAYER-
ARM gently to the
desired position
over the record.
9
TURNTABLE