Installation Guide

2
5. Connect the black fixture lead to the black wire in the outlet box with an approved fastener (wire nut).
6. Align the holes on the canopy with the holes on the mounting bracket, then fix the canopy with the decoration part.
7. Use the lamp holder out ring to tighten the shade onto the lamp holder.
8. Install the lamps (light bulbs).
NOTE: This fixture is rated for Max 60 watt type .
9.Restore power at the circuit breaker or the fuse box.
WARNING
DO NOT EXCEED RECOMMENDED WATTAGE!
If you have any other needs or queries, please feel free to contact us by email [e-mail].
Website： Http：//www.exbriteusa.com Hotline: [phone]