Installation Guide

17
Alu.Threshold Installation
10
3
X+(
1 9/16inch
)
5
6
X1
I
1. Threshold Cap(M&N) are divided into left and right two types, Select according to the
installation method Threshold Cap(M&N) as Fig 1;
2. Measure "X" and cut the
Alu. Threshold
(I) same length as "(X+1 9/16inch)" as Fig.2 ;
Fig.3 and Fig.4;
3. Apply silicone into the groove along the entire length of the
Alu. Threshold
(I) as Fig 5;
4. Combine the
Alu. Threshold
(I) and Threshold Cap(M&N) as Fig.6 .
The large curved lip of the dam strip is intended to face toward the outside of
the shower to ensure the flow of water is redirected towards the drain.
NOTE
"X" M to N width.
4
SHOWER DOOR
Hotline : + 1 302 336 8180
M1
I
N1
M1
N1
M2
N2
Right pivot
Left pivot
X
1 2