Owner`s manual

Settings Menu
• Click on the exaSound icon on the Menu and select Settings.
• Use the Max Volume setting to prevent accidental playback at volume levels that are too loud.
• The e28 DAC automatically turns itself off after a period of inactivity. Use the Power Off Timeout
setting to adjust the time interval before shutdown.
Settings changes may not come into effect until playback is restarted.
Step-By-Step Player Configuration Instructions
Check the Guides section of the exaSound Blog for player step-by-step configuration instructions:
exasound.com/Blog.aspx.
Playing Music from SPDIF Sources
The e28 DAC makes it possible to enjoy greatly improved level of sonic clarity and fidelity from stereo
SPDIF sources. The sonic improvement is the result of the outstanding jitter cancelling capability, superb
signal to noise ratio, and low distortion levels of the e28 DAC.
You can connect up to two SPDIF devices, such as disk players and wireless music servers.
To use SPDIF sources:
1. Select SPDIF input by pressing the Input button on the device front
panel or by using the Previous Input / Next Input buttons on the
remote control.
2. The e28 front panel display will flash a Changing Input message.
3. The e28 front panel will display information about the input in use,
the current sampling rate, and the master volume level.
Page | 23